TRANSDAT Geosoftware выполняет координатные преобразования и геодезические изменения сдвигов величины между большим количеством координат и системами справочной информации Германии, Европы, Америки, Австралия( по всему миру) с высокой точностью и скоростью. Содержит современные и исторические координаты и системы справочной информации всех государств Европейского союза, государственные системы NAD27 und NAD83 всех Американских штатов и канадских систем, австралийских систем.

**********************************************************************
TRANSDAT Geosoftware executes coordinate transformations and geodetic datum shifts between many coordinate and reference systems of America, Australasia, Europe, Germany special and world-wide, at high precision and high speed.
Navigation maps are printed with a coordinate grid that is a two-dimensional projection of the three-dimensional Earth surface, based on a given Coordinate System. Historically the countries over the world use many different coordinate systems. Earth is shaped not like a sphere; it is a geoid that has no exact mathematical definition and whose form can be at best approximated by an ellipsoid. To make an exact projection of a region into a coordinate system, the region is first projected onto a so-called reference ellipsoid that would fit the region best. The reference ellipsoid is mathematically defined and can be used for a coordinate system projection. Historically countries all over the world developed and used different and often more than one local and global Reference Systems.

The current and many historical coordinate and reference systems of all countries of the European Union (EU) including the eastern extensions from 2004 and 2007 and the systems of the European non-EU countries.
The INSPIRE© supported European ETRS89 systems.
The US and Canadian State Plane Coordinate Systems (SPCS) on NAD27 and NAD83 and other coordinate and reference systems of the North American continent.
The coordinate and reference systems of the Australasian continent.
Many coordinate and reference systems of the countries of other continents.
World-wide NTv2 grid file supported coordinate transformations.
All world-wide coordinate and reference systems in current use.
The German coordinate and reference systems of the old and new federal states, the 40 Prussian Soldner Land Registers, the German 'Lagestatus', and exact reference systems of the German federal states.

You will find a complete list of the coordinate and reference systems supported by the program on the internet or after downloading the free test version of the program. TRANSDAT supports all by the INSPIRE directive prescribed ETRS89 conversions with NTv2 grid data, e,g. Gauss-Kruger / DHDN to UTM / ETRS89 with BeTA2007. The NTv2 standard with national grid files is world-wide full supported. Apart from the given world-wide and state-specific systems, your own personal coordinate systems and geodetic reference systems can be defined with Helmert (Bursa / Wolf, ISO19111) or Molodenski parameters. Calculations can be performed with coordinates entered directly, loaded from files in various formats (Text, CSV, SDF, dBase, ArcShape and ArcGenerate), or passed via batch processing. ArcShape files can be viewed with the program-internal Shape Viewer. A programmable GPS interface makes it possible to read coordinates into a notebook computer from a low-cost GPS antenna.

The program has a user-selectable German or English interface and comes with extensive bi-language online help. The program can be run on most common networks and it is possible to use Terminal Services on WINDOWS Servers. In case of a network installation the clients are installed
automatically by the program.

Traditional Systems

Each country uses or recently used its own Coordinate and Reference system (Geodetic Datum). In some countries multiple competing systems where used simultaneously. Federal Republic of Germany is a good illustration of this situation:

DHDN (old blocks)
In the old States of the Federal Republic as well as in unified Germany was used, and is still in use, the Potsdam Datum (DHDN) based upon the Bessel Ellipsoid. The projection is normally made into the Geographic coordinate system or into the Gauss-Krueger coordinate system with three degrees wide meridian strips. Small-scale maps were often made using various Lambert Coordinate Systems.

S42/83
The former German Democratic Republic used the System S42/83 based on a Krassowskij ellipsoid and projection into the Gauss-Krueger coordinate system with six degrees meridian strips.

RD83 / PD83
Some of the Federal Republic new states use the Rauenberg Datum RD83 and the Rauenberg Datum PD83 projected onto the Bessel Ellipsoid. The projection is uniformly made to the old Federal Republic States in the Geographic coordinate system, or to the Gauss-Krueger coordinate system with three degrees wide meridian strips.

DHDN90
On the Day of German Unity, October 3rd 1990, representatives of the Basic Surveying of the old and new federal States developed a draft which had a standardised, geodetic "Reference System" in the unified Germany as its objective. This could only happen by definition, while connecting the historically grown reference systems DHDN, S42/83, RD83 and PD83 described above to a new DHDN90. The DHDN90 can be considered as a Compound Coordinate Reference System (CCRS).

ED50
Military topography uses a NATO standard based on the European Datum ED50 with the International Ellipsoid from Hayford and projection to the UTM coordinate system or to the Military Grid Reference System (MGRS).

WGS84
Thanks to the growing popularity and wide use of the American satellite-based Navstar GPS (Global Positioning System), internationally and of course within the Federal Republic of Germany, there is increased acceptance of the world-wide WGS84 (World Geodetic System), introduced in 1984. It become even more important after the intentional degradation of the GPS signal was lifted in Mai 2000.

With Galileo, the European satellite positioning system, which is operational at the end of 2010, and with the to the same time modernized Navstar GPS (GPS III), the development of the modern satellite navigation continues.
A modern system

The sheer multitude of different Coordinate and Reference systems did and still does considerably complicate multinational space-oriented projects. Proliferation of GIS technologies driven by increased use of GPS and globalization of trade, politics, and environmental protection adds to demand for more multinational geodetic data. An important condition for progress in this area is a unified coordinate system along with a unified reference system. The global UTM coordinate system (Universal Transversal Mercator Projection) with 60 meridian strips can be used worldwide. The ETRS89 (European Terrestrial Reference System 1989) based on the ETRF89 (European Terrestrial Reference Frame) was analyzed and measured by a combination of various modern navigational methods, is assessed as European ReferenceSystem.

ETRS89
In the 1990-ties the Surveying Authorities of most European countries decided to use for extensive topographic and cadastral projects the UTM coordinate system and the ETRS89 reference system. It is based on the GRS80 ellipsoid (Geodetic Reference System). UTM coordinates are used for projection in most maps across Europe.

There is another big advantage in moving to the modern coordinate and reference systems. The American Satellite Navigation System GPS data is referenced to the WGS84 (World Geodetic System). The minor difference between WGS84 and ETRS89 makes it possible to use GPS data in modern maps directly, with negligible impact on accuracy.

Exact datum shifts from DHDN90 to the modern ETRS89 are possible with grid files of the NTv2 standard since 2008.

Официальный Сайт | Homepage: www.killetsoft.de/p_trda_e.htm
Размер | Size: 3.6 MB

Killetsoft.TRANSDAT.v17.37.Multilanguage-LAXiTY


Страница загрузки/Download - SendFile.su

Зеркало/Mirror - Letitbit.net

Зеркало/Mirror - Rapidgator.net

Зеркало/Mirror - Vip-file.com

Пароль/Password: www.2baksa.net

Уважаемые пользователи nowa.cc и 2baksa.ws. У нас сложилось тяжёлое финансовое положение. Мы работаем для вас вот уже более 15 лет и сейчас вынуждены просить о помощи. Окажите посильную поддержку проектам. Мы очень надеемся на вас. Реквизиты для переводов ниже. WMZ: 826074280762 WME: 804621616710 4100117770549562 Спасибо за поддержку!

Внимание! Всегда проверяйте анти-вирусом файлы, полученные по ссылкам в комментариях! Attention! Always check files you download from links in comments with your anti-virus software!

Для добавления комментариев необходимо зарегистрироваться на сайте