PeToUSB это приложение для форматирования и создания загрузочных разделов из карт памяти USB и жёстких дисков USB. Также есть дополнительные возможности, например резервирование и восстановление Master Boot Record на устройстве. ******************************************************************************************* PeToUSB is a Win32 GUI application for formatting and making bootable, USB Flash Memory Drives and USB HardDisks and optionally copying the output from a successful BartPE/WinPE build to the device. There are options to backup/restore the MBR on a device.

Catagories : Development Status: Stable Operating System: Windows XP/2003 Development Environment: MSVS.NET 2003 Boot your BartPE/WinPE from a USB Flash Disk Drive! Also supports USB HardDisks. PeToUSB is a GUI Win32 application that will partition, format and makebootable to XP/W2K3 a USB Flash Disk (UFD). A lot of utilities that say they can do this, actually cant. PeToUSB does not make the device DOS bootable, it makes it XP bootable (ie: the bootstrap code will look for NTLDR). A lot of improvements have been made since version 2. Check the change log for details. But in short its more compatible with more devices, and easier to use with more functionality. New Features/Changes: o Rewrites the MBR code just in case its corrupted. This option can be disabled if desired. o On Removable media, the partition is completely rewritten. o Backup/Restore MBR. o View disk information. o Assign drive letters. o Automatic notification of device arrival/removal. o Now supports WinPE builds as well. To make a UFD bootable requires it to be formatted to FAT16, the partition set as bootable AND the volume boot sector id to be set to 0x80. If all this is done the UFD should be bootable on any system whose BIOS can boot to USB-HDD. Some UFDs partition tables have been set to a starting offset of 32 sectors, this will not be bootable under USB-HDD. It seems that USB-ZIP requires this, USB-HDD requires offset of 63 sectors. If your UFD still wont boot after this type of format then either your UFDs chipset isnt capable or the BIOS on the system you are trying to boot is either set incorerectly or incapable of booting to UFD. But PeToUSB does more than just make a UFD bootable. It will also copy all the required files from a successful BartPE build, to the UFD. The all that remains is for you to boot the stick on a system. Instructions ------------ o Build you BartPE/WinPE installation. No need to check the CD Record box. o Insert your USB stick into the slot. o BACK UP ANY DATA, BECAUSE WE ARE GOING TO FORMAT IT! o Use Tools/Backup MBR to make a backup of the disks MBR. (This can be restored later if things dont go as excpected) o Remove any security options on the UFD as this will mess up any booting process. o Extract PeToUSB.exe from its zip archive and run it. o First we want to select the USB stick (Destination Drive). In the window check your USB stick has been recognised. There is a drop list containing all the detected removable disks. If you cant see it. Then click the Refresh button. Make sure you select the drive that you want to use. o Next we want to get the path to our PE installation. Click the [...] button and choose the path. The OK on the Browse Dialog will not display until you select the correct folder. o Next we want to choose our options. For the first run we need to choose:- o Enable Disk Format o Enable File Copy (if you are only wanting to format then leave this) o Now we are ready to format the drive and copy the PE to the stick. Click Start button and answer any confirmation boxes. o Copying the files to a UFD takes a lot longer than to an IDE drive. So dont worry about it taking some time. Just watch the progress bar for an indication of how long it will take. o After successfully completing the above operations. Your stick is now ready to be booted on the target system. SOME NOTES ON DISKS ------------------- PeToUSB will list fixed and removable disks. On the following conditions:- It is LESS than 2GB. (It wont format FAT16 > 2Gb) It is NOT the current system drive. It is NOT the drive where PeToUSB is running from. If it is a USB HardDisk (eg FixedMedia) then it must have its partitions already defined, as PeToUSB will not partition these devices due to possibilty of user losing their data when the partitions are altered. And the first paritition starting at Sector 63 and being less that 2Gb in size. If it fails to format then check that the whole partition is enclosed in the first 2Gb of the physical disk. The format function will have problems if not. SOME NOTES ON SETTING BIOS OPTIONS ---------------------------------- Im no expert at compatablity of BIOSs with UFDs. But I have learnt a few things... o In the BIOS boot sequence, set USB-HDD as the first boot device. o Then make sure the Boot Other Devices is disabled. o Save the BIOS settings. And power down. o Stick you UDF in the slot and powerup. These notes relate to AWARD-BIOS. Other BIOS manufacturers will have different but similar settings. You may need to experiment! System Requirements ------------------- PeToUSB will run on windows XP/2003/BartPE and most 2000Pros It requires about 3Mb ram to run. USB Disk Minimum Size of 256MB (dependant on size of PE build) USB STICKS TESTED ================= SanDisk Cruzer Mini SUCCESSFUL PenDrive 2.0 Mini SUCCESSFUL PQI iStick 2.0 SUCCESSFUL I-Bead MP3 Player FAILED (I think the UFD initializes too slow for the BIOS) DISCLAIMER ========== This software and instruction is brought to you freely and in good faith. However the author or distributor of this program cannot be held liable for any misuse/malfunction/failure which causes damage to any system or hardware and cannot be held liable for the cost implications thereof or of any consquence of such misuse/malfunction/failure. 100 КБ
Страница загрузки/Page of loading

Уважаемые пользователи nowa.cc и 2baksa.ws. У нас сложилось тяжёлое финансовое положение. Мы работаем для вас вот уже более 15 лет и сейчас вынуждены просить о помощи. Окажите посильную поддержку проектам. Мы очень надеемся на вас. Реквизиты для переводов ниже. WMZ: 826074280762 WME: 804621616710 4100117770549562 Спасибо за поддержку!

Внимание! Всегда проверяйте анти-вирусом файлы, полученные по ссылкам в комментариях! Attention! Always check files you download from links in comments with your anti-virus software!

mister-x 06.12.05 | 22:01:46 спасибо

manhvo 07.12.05 | 06:31:18 it need password to login

wirepuller2004 07.12.05 | 06:51:37 I joined the website and received a logon username and password for free. The file downloaded in no time at all. Good luck!javascript:InstaSmilie(' ') Very Happy

bounty 07.12.05 | 08:57:44 перелил на http://slil.ru/22476156

slam 07.12.05 | 09:12:18 Народ, вот объясните мне. Если усбфлашдрайв загрузочный, то могу ли я слить туда дистриб винды, а патом проинсталить винду с флешки на комп? или я чето не так понял? p.s. Пасиба!

StH 07.12.05 | 18:06:57 To slam [slamik Собака gmail Точка com] Врядли, потому как после первого перегруза, запучтиться виндовый инсталятор с HDD и твоего USB-драйва просто не увидит...

slam 07.12.05 | 21:28:52 To StH, дето какимто местом я читал/слышал что такое возможно, может ослышался....вобщем если как-то ето через биос реализовать....может быть...

VictorVG 29.02.08 | 18:46:14 slam Теоретически - да, используя например команду winnt /b. P.S. Только на системном диске для этого потребуется не менее 2,5 Гб свободного дискового пространства. Фокус называется "сетевая установка". А теоретический он из-за того, что можно получить массу ошибок при начальном копировании дистрибутива...

Для добавления комментариев необходимо зарегистрироваться на сайте